Volume 2, Issue 6, December 2014, Page: 128-134
Effect of Welding Parameters on Weld Bead Shape for Welds Done Underwater
Joshua Emuejevoke Omajene, LUT Mechanical Engineering, Lappeenranta University of Technology, Lappeenranta, Finland
Jukka Martikainen, LUT Mechanical Engineering, Lappeenranta University of Technology, Lappeenranta, Finland
Paul Kah, LUT Mechanical Engineering, Lappeenranta University of Technology, Lappeenranta, Finland
Received: Nov. 18, 2014;       Accepted: Nov. 30, 2014;       Published: Jan. 4, 2015
DOI: 10.11648/j.ijmea.20140206.17      View  3145      Downloads  598
Abstract
The desire to model a control system so as to optimize the welding process parameters and the effect of the environment during underwater wet welding makes it necessary to study the effects of these parameters as it affects the weld bead geometry of welds achieved in underwater welding. The objective of this paper is to analyze how welding arc current, voltage, speed, and the effect of the water environment affect the weld bead geometry such as bead width, penetration, and reinforcement height. Comparing the differences of the effects of welding input parameters for air and wet welding as it affects the welding output quality parameter is the method employed in this research paper. The result of this study will give a better understanding of applying control mechanism in predicting the quality of a weld during underwater welding. A clearer insight of the weldability of structural steels for offshore applications as it relates to underwater welding, having a full knowledge of the nonlinear multivariable parameters is indicative of better control methods.
Keywords
Bead Geometry, Process Parameter, Water Depth, Water Temperature, Underwater Welding
To cite this article
Joshua Emuejevoke Omajene, Jukka Martikainen, Paul Kah, Effect of Welding Parameters on Weld Bead Shape for Welds Done Underwater, International Journal of Mechanical Engineering and Applications. Vol. 2, No. 6, 2014, pp. 128-134. doi: 10.11648/j.ijmea.20140206.17
Reference
[1]
R. T. Brown & K. Masubuchi, "Fundamental Research on Underwater Welding," Welding research supplement, pp. 178-188, 1975.
[2]
Yong-hua SHI, Ze-pei ZHENG & Jin HUANG, "Sensitivity model for prediction of bead geometry in underwater wet flux cored arc welding," Transaction of nonferrous metals society of China, pp. 1977-1984, 2013.
[3]
B. K. Srivastava, S. P. Tewari & J. Prakash, "A review on effect of arc welding parameters on mechanical behaviour of ferrous metals/alloys," International Journal of Engineering Science and Technology, vol. 2, no. 5, pp. 1425-1432, 2010.
[4]
V. Kumar, "Modeling of weld bead geometry and shape relationships in submerged arc welding using developed fluxes," Jordan journal of mechanical and industrial engineering, vol. 5, no. 5, pp. 461-470, 2011.
[5]
U. NAVY, "Underwater Cutting and Welding Manual," Naval Sea Systems Command, USA, 2002.
[6]
J. D. Majumdar, "Underwater Welding - Present Status and Future Scope," Journal of Naval Architecture and Marine Engineering, vol. 3, pp. 39-47, 2006.
[7]
WeiMin Zhang , GuoRong Wang, YongHua Shi & BiLiang Zhong, "LSSVM Model for Penetration Depth Detection in Underwater Arc Welding Process," Journal of Information and Computing Science, vol. 5, no. 4, pp. 271-278, 2010.
[8]
M. Rowe & S. Liu, "Recent Development in Underwater Wet Welding," Science and Technology of Welding and Joining, vol. 6, no. 6, pp. 387-396, 2001.
[9]
"https://www.hera.org.nz/Category?Action=View&Category_id=522," Hera Innovation in Metals, 2014. [Online]. Available: https://www.hera.org.nz. [Accessed 16 June 2014].
[10]
V. Kumar, "Use of Response Surface Modeling in Prediction and control of flux consumption in submerged arc weld deposits," Use of Response Surface Modeling in Prediction and, vol. 2, pp. 1-5, 2011.
[11]
S. Liu, D. L. Olson & S. Ibarra, "Underwater Welding," ASM Handbook, vol. 6, pp. 1010-1015, 1993.
[12]
S. P. Tewari, A. Gupta & J. Prakash, "Effect of welding parameters on the weldability of material," International Journal of Engineering Science and Technology, vol. 2, no. 4, pp. 512-516, 2010.
[13]
J. Singh, C. D. Singh, J. S. Khamba & F. P. Singh, "Influence of Welding Parameters on Flux Consumption in Submerged Arc Welding," International Journal for Multi Disciplinary Engineering and Business Management, vol. 2, no. 1, pp. 1-3, 2013.
[14]
"http://www.techtrain123.com/publicdownloadsallfiles/Stick%20Welding.pdf," [Online]. Available: http://www.techtrain123.com. [Accessed 15 June 2014].
[15]
Miller, "http://www.millerwelds.com/pdf/guidelines_smaw.pdf," July 2013. [Online]. Available: http://www.millerwelds.com. [Accessed 15 June 2014].
[16]
L. J. YANG, R. S. Chandel & M. J. Bibby, "The Effects of Process Variables on the Weld Deposit Area of Submerged Arc Welds," WELDING RESEARCH SUPPLEMENT, pp. 11-18, 1993.
[17]
J. Kim & S. Na, "A Study on the Effect of Contact Tube-to-Workpiece Distance on Weld Pool Shape in Gas Metal Arc Welding," Welding Research, pp. 141-152, 1995.
[18]
"http://2dayforme.blogspot.fi/2012/11/wps-variables.html," [Online]. Available: http://2dayforme.blogspot.fi. [Accessed 29 June 2014].
[19]
R. L. Johnson, "The effect of water temperature on underbead cracking of underwater wet weldments," Naval Postgraduate School, California, 1997.
[20]
P. Ghadimi, H. Ghassemi, M. Ghassabzadeh & Z. Kiaei, "Three dimensional simulation of underwater welding and investigation of effective parameters," Welding Journal , pp. 239-249, 2013.
[21]
B. Singh, Z. A. Khan & A. N. Siddiquee, "Review on effect of flux composition on its behaviour and bead geometry in submerged arc welding," Journal of mechanical engineering research, vol. 5, no. 7, pp. 123-127, 2013.
[22]
V. K. Panwar & D. K. Choudhary, "Application of Two-Level Half Factorial Design Technique for Developing Mathematical Models of Bead Penetration and Bead Reinforcement in SAW Process.," International Journal of Innovative Research in Science, Engineering and Technology, vol. 2, no. 6, pp. 2011-2023, 2013.
[23]
J. E. R. Dhas & M. Satheesh, "Sensitivity analysis of submerged arc welding parameters for low alloy steel weldment," Indian Journal of Engineering and Materials Sciences, vol. 20, pp. 425-434, 2013.
Browse journals by subject