Volume 5, Issue 2, April 2017, Page: 107-111
Design, Manufacture and Performance Evaluation of an Effective Dual Operated Groundnut Decorticator with Blower
Enoch Asuako Larson, Department of Mechanical Engineering, Tamale Technical University, Tamale, Ghana
Philip Yamba, Department of Mechanical Engineering, Tamale Technical University, Tamale, Ghana
Anthony Akayeti, Department of Mechanical Engineering, Tamale Technical University, Tamale, Ghana
Samuel Adu-Gyamfi, Department of Mechanical Engineering, Sunyani Technical University, Sunyani, Ghana
Received: Feb. 27, 2017;       Accepted: Mar. 9, 2017;       Published: Mar. 28, 2017
DOI: 10.11648/j.ijmea.20170502.15      View  1727      Downloads  98
A manual (hand operated or bicycle paddle) groundnut decorticating machine attached with a blower is designed, manufactured and its performance assessed. The main components of the machine were the frame, hopper, neck feed control gate, shelling drum, shaft running on bearings, a pneumatic type mechanism, concave sieve and a blower. The rest are pulley and sprocket, discharge outlet and belt drive. The assembled angle iron parts were welded together whiles the sheet metal parts were riveted to hold in position. Testing of the decorticating machine was assessed at three different moisture contents of groundnut (0, 5.1 and 9.3%) and three different levels of machine shaft speed (10, 20 and 30 rpm) all at an average feed rate of 25kg/hr. The results revealed that the decorticating machine’s optimum performance was at 20 rpm machine shaft speed with groundnut moisture content of 0% (purely dry), machine cracking efficiency and percentage groundnut fully cracked was 71.2% and 85.3% respectively. There was reduction in machine performance at machine speeds of 10 rpm and 30 rpm with 45.1%, and 49.7% machine cracking efficiency respectively for the same feed gate rate openings. This was because at a speed of 10 rpm, the nuts were partially cracked (41.6%) and that of 30 rpm and cracked (39.3%), the quantum of groundnut losses through the blower increased considerably leading to a reduction in the quantity of groundnut collected.
Groundnut, Manual, Blower, Cracking Efficiency, Moisture Content
To cite this article
Enoch Asuako Larson, Philip Yamba, Anthony Akayeti, Samuel Adu-Gyamfi, Design, Manufacture and Performance Evaluation of an Effective Dual Operated Groundnut Decorticator with Blower, International Journal of Mechanical Engineering and Applications. Vol. 5, No. 2, 2017, pp. 107-111. doi: 10.11648/j.ijmea.20170502.15
Copyright © 2017 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
J. Beghin, N. Diop, H. Matthey, and M. Sewadeh, "The Impact of Groundnut Trade Liberalization: Implication for the Doha Round," in American Agricultural Economics Association Annual Meeting, July, 2003, pp. 27-30.
P. Vijaya Kumar, Y. Ramakrishna, K. Krishna-Murty, and B. Ashok-Kumar, "AM Shekh Identifying the climatic constraints for optimum production of groundnut and delineating the areas with highest production potential on climatic basis," in Proc. of the symposium on Tropical crop Research and Development India International, Trissur, India, 1997.
FAOSTAT (2011). FAOSTAT database. Retrieved from http://faostat.fao.org/. Accessed 20 July, 2015.
Ministry of Food and Agriculture (2011). Statistics, Research and Information Directorate (SRID) Ghana.
J. A. Akolgo, G. T. Kwadzo,and D. P. K. Amegashie, Comparison of the profitability of groundnut production in West Mamprusi andBunpkurugu-Yuyoo districts in Northern Ghana. Global Journal of Biology, Agriculture & Health Sciences, Vol.3(2), 2014, pp. 144-151.
Wumbei A. K., Koyiri, G., Ayariga, S. K, Anglarere, J. and Paul, F. (2000). Report on Women Income Generating Activities. A Study for IFAD/MoFA, Northern Region, Ghana.
R. Awuah, O. Kwaku, S. Agyemang, C. Fialor, and C. Jolly, "Aflatoxigenic fungi and aflatoxin contamination of groundnut and groundnut-based products in Ghana: implications and concerns," in Proceedings of the National Workshop on Groundnut and Groundnut Aflatoxins Ghana, 2000.
K. Sacilik, R. Öztürk, and R. Keskin, "Some physical properties of hemp seed," Biosystems Engineering, Vol. 86, 2003, pp. 191-198.
O. C. Ademosun, Performance evaluation of cocao dehauling and winnowing machine, AMA, 24(3), 1993, 5-13.
J. A. Akpobi, and A. A. Oniah, Design and manufacturing of a palm fruit digester screw press, Nigeria Journal of Engineering management, 10(2), 2009, 10-19.
Browse journals by subject