Volume 3, Issue 1-1, January 2015, Page: 33-39
Exhausting, Pneumatic Transport
Karel Adamek, VUTS – Centre of Machinery Research, Liberec, Czech Rep.
Jan Kolar, VUTS – Centre of Machinery Research, Liberec, Czech Rep.
Pavel Peukert, VUTS – Centre of Machinery Research, Liberec, Czech Rep.
Martin Pustka, VUTS – Centre of Machinery Research, Liberec, Czech Rep.
Petr Pulpan, VUTS – Centre of Machinery Research, Liberec, Czech Rep.
Radim Foldyna, HP – Pelzer, Zatec, Czech Rep.
Petr Bilek, Preciosa, Jablonec nad Nisou, Czech Rep.
Ales Prusek, Magna- Exteriors and Interiors Bohemia, Liberec, Czech Rep.
Received: Sep. 9, 2014;       Accepted: Sep. 12, 2014;       Published: Oct. 17, 2014
DOI: 10.11648/j.ijmea.s.2015030101.16      View  2705      Downloads  156
Abstract
The contribution describes frequent functional problems of exhausting devices, caused by no observing of essential rules of fluid mechanics. For instance, due to the unbalanced tubing system of several branches the medium flows in individual connections and their relevant energy transports are not corresponding to the designed one, or the diffuser of very large enlargement leads to the flow separation, increased noise level etc.
Keywords
Numerical Flow Simulation, Exhausting, Pneumatic Transport, Aerodynamic Noise
To cite this article
Karel Adamek, Jan Kolar, Pavel Peukert, Martin Pustka, Petr Pulpan, Radim Foldyna, Petr Bilek, Ales Prusek, Exhausting, Pneumatic Transport, International Journal of Mechanical Engineering and Applications. Special Issue:Numerical Flow Simulations in Textile Industry. Vol. 3, No. 1-1, 2015, pp. 33-39. doi: 10.11648/j.ijmea.s.2015030101.16
Reference
[1]
K. Adamek, "Problems of industrial air exhausting", WCCM XI + ECCM V + ECFD VI, Barcelona, 2014. ISBN 978-84-942844-7-2.
[2]
K. Adamek, J. Kolar, P. Půlpan, M. Pustka, "Noise reduction at the fan outlet", Int. conf. on energy, environment, ecosystems and development (EEED 2013), Rhodes Island 2013. ISBN 978-1-61804-202-6.
[3]
K. Adamek, J. Kolar, P. Půlpan, M. Pustka, "Noise reduction at the fan outlet", Computational Problems of Engineering, ed. Matsorakis, Springer Verlag, 2014, ISBN 978-1-61804-202-6.
[4]
Czech Utility design No. 2013-28182: Device for noise damping of the air flow, 20.01.2014.
[5]
J. Kolar, K. Adamek,"Evaporation and impact flows in CFD", EMT09 (Experimental Fluid mechanics, TU Liberec, Jičin 2009. ISBN 978-80-7372-538-9.
[6]
K. Adamek, "Diffuser of large angle of enlargement", Int. conf. Applic. of exp. and numer. meth. in fluid mech. (2000), p. 6-11, University of Zilina. ISBN 80-7100-717-X (in Czech).
Browse journals by subject